beam casting meaning in Chinese

混凝土梁浇捣

To study the flexural behavior , ultimate bearing state and laws of internal force redistribution of prestressed concrete continuous beams cast by different construction methods , the model tests for three pieces of the continuous beams were carride out , in which three kinds of the construction methods , such as those of lowering formwork supports at one time , transferring simply - supported structure into the continuous one and casting the beam by cantilever construction , were considered
摘要为研究不同施工方法下预应力混凝土连续梁的弯曲性能、极限受力状态及内力重分布规律，进行了3根连续梁模型试验，分别考虑一次落架、简支变连续和悬臂施工3种施工方法。
The results indicate that the different construction methods will have influence on the mode of the internal force redistribution , however , the methods will not cause influence on the mode of structure failure , and the ductility of the final structure will make the ultimate bearing capacity of the beams cast by the different methods get close to an identity
结果表明：不同施工方法会影响内力重分布的模式，但不影响结构的破坏模式，最终结构的延性将使不同施工方法梁的极限承载力趋近一致。